Axis 206W

This camera cannot be connected to a wired Ethernet network. The camera's manual contains instructions for setup over a USB connection.

It is also possible to set the IP address of any Axis camera using the Mac OS X Terminal.

Toshiba IK-WB01A and IK-WB11A

To access the settings for one of these cameras, you will need to enter the following into a web browser:

<IP address>/admin.htm

You should change the camera's COM Mode from adhoc to infrastructure.

This camera requires you to enter a Default Gateway, which should be the IP address of your router. If you don't have a router, enter any IP address.

Panasonic cameras

if the camera has access level settings, make sure that Limit time of Continuous Motion JPEG is set to unlimited.