quinkink

Camera Info Window Status format suggestion
The new customizable camera info on the video windows are very helpful. How about making the full suite (pixels, size, data-eage, loss etc. ) available?

Comment by quinkink February 10 permalink
Camera Info Window Status format suggestion
*Can I have it remain grey *or *white with a black letter ...

Comment by quinkink November 2019 permalink
Camera Info Window Status format suggestion
Thanks! Works as expected and the smaller menu from clicking the letters are easier than long dropdowns with many items. The orange background burns my eyes though. Can I have it remain grey with a black letter indicating the ON state? momentary re…

Comment by quinkink November 2019 permalink
V5 trigger other cameras not working
Correction: all 4 events from camera-B were triggered by its own motion detection. Camera-A cross triggering never worked once.

Comment by quinkink November 2019 permalink
Copy settings from Camera to NewCamera bug?
I agree with Spiv because I encountered the same issue, trying to duplicate cameras then changing just one parameter.

Comment by quinkink September 2019 permalink
5 camera license?
Can two 8-camera licenses run on the same mac managing 16 cameras total?

Comment by quinkink September 2019 permalink
How to specify font size for text overlay?
Is it possible to change overlay text position to other corners?

Comment by quinkink September 2019 permalink
ios SecuritySpy app or Remote Patrol
Thanks Ben! I didn't know I could go to capture videos from single camera views.

Comment by quinkink September 2019 permalink
Error performing motion capture for camera
Q1614 has no zipstream though my other cameras have it. Those zipstream cameras work beautifully with SS while saving tremendous bandwidth. I lowered the Q1614 GOP to 32 and the SS errors did not show again.

Comment by quinkink September 2019 permalink
ios SecuritySpy app or Remote Patrol
I meant thumbnails of each camera to choose which camera's history to review. I'd rather poke at a thumbnail than scroll through the list of camera names for my 16-camera setup, or a scrollable horizontal list of thumbnails across the top.

Comment by quinkink September 2019 permalink
ios SecuritySpy app or Remote Patrol
Your official SecuritySpy iOS app works great. May I suggest using thumbnails instead of cam names in captured video selection??

Comment by quinkink September 2019 permalink
Axis' Zipstream and SS?
My Axis camera zipstream setup has an option for minimum FPS. Set that to 5 if that's what SS needs for reliable motion detection. Zipstream has options for dynamic FPS and GOP.

Comment by quinkink July 2019 permalink
Run V5 in El Capitan?
Thanks for the details. I'll definitely go for a try. Over the weekend I installed macOS 10.15 Catalina in Virtualbox on a Windows PC, then installed sS V5 and everything works! This is at a different site that runs Axis Camera Station and SS i…

Comment by quinkink July 2019 permalink
Run V5 in El Capitan?
Thanks @weatherguy. Can the patch be done in place without reinstalling every app? How long is the whole process? Still on my trusty reliable 2008 Mac Pro 3,1 8-core. 11 years without a single hiccup!

Comment by quinkink July 2019 permalink
Run V5 in El Capitan?
Is v4 compatible with v5 when v4 is used just as a viewer for the v5 server? Any issues to watch out for?

Comment by quinkink July 2019 permalink
Run V5 in El Capitan?
I bought the V5 upgrade, already got a new license code, my v4 license still works. Are you saying my v4 will no longer work when Ben finds out? Please don't inactivate my old v4 license because I'd rather shelf my brand spanking new v5 …

Comment by quinkink July 2019 permalink
line-in audio out of sync with USB camera
Updated to 4.2.11, same symptom. Deleted the camera in question and re-added. Problem fixed and no audible lag.

Comment by quinkink June 2019 permalink
Axis digital autotracking
I use Axis's digital autotracking on several of their cameras. Yes it serves a separate stream and SS just required one camera license for all the streams from the same ip.

Comment by quinkink May 2019 permalink
line-in audio out of sync with USB camera
Continuous captures are about 30 min. I noticed the problem only after May 9 or May 10 and I remember that's approximately when SS was upgraded to 4.2.10. Clips from before that had no similar issues. The out-of-sync is from the start to the …

Comment by quinkink May 2019 permalink
older OS support
Thank you for great support!

Comment by quinkink March 2019 permalink
Audio lags behind video in recordings by up to 10+ seconds
Upon double checking, the audio leads, not lags the video by 10s.

Comment by quinkink August 2018 permalink
restoring unf files to mov
On one file I tried I left the fps and resolution blank guessing the fixer app will use the info found in the input file, it ran wihtout error messages but I ended up with a all dark video.

Comment by quinkink September 2017 permalink
restoring unf files to mov
Anoterh file got: Bad parameter Error code: 100, -50

Comment by quinkink September 2017 permalink
restoring unf files to mov
I got the following when using the fixer on the unf files. There was an error processing the file No codec Error code: 37, -8961

Comment by quinkink September 2017 permalink
Axis M1034-W only works with SS on JPEG but not h.264
Everything works as expected after forcing the camera to factory default and re-setup. Must be user error earlier. Thanks!

Comment by quinkink January 2017 permalink
Preference changes don't take affect until you close preferences
Hold down Command-S on the keyboard will save immediately.

Comment by quinkink June 2016 permalink
Can you have different destinations for camera capture files?
When I get good wifi the received frames goes up to 8fps but still lost 100%, displayed frames=0.

Comment by quinkink March 2016 permalink
Can you have different destinations for camera capture files?
I used this simple URL in Tinycam generic URL camera setting: http://addr:port/++viewlive?cameraNum=1&method=4 Tinycam reports Received frames = 2fps Displayed frames=0 Dropped frames=100% User name & Password set correctly and I get a …

Comment by quinkink March 2016 permalink
Can you have different destinations for camera capture files?
Is there a way to request the SS Web Server to stream a camera at a lower resolution than the source? I use Tinycam on my Android phone to watch live from SS but do not see any resolution settings.

Comment by quinkink March 2016 permalink
"Video Device Setting -> Input Number" corresponds to Axis Stream Profiles?
Problem solved: instead of leaving Frame Rate to default, I forced Frame Rate to a defined number in addition to setting resolution to 640x360, then SS gets the low resolution stream.

Comment by quinkink March 2016 permalink

More Comments

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: quinkink
Joined: June 2015
Visits: 123
Last Active: July 26
Roles: Member