Lorex/FLIR LNR608 and 4K stream subtype
Hi,
Trying to set-up a Lorex LNR608 4K NVR with securityspy.
Everything works great with the low-resolution stream set up with in SecuritySpy by configuring the IP Address, set as Manual Configuration, set as RTSP, and request set as:
cam/realmonitor?channel=1&subtype=1
but I'd like to capture the 4K stream available at subtype 0. If I try that in security spy I get "Unexpected data" in the view window.
If I try the same request in VLC with the request formatted as:
rtsp://[my ip address]/cam/realmonitor?channel=1&subtype=0
it works great and I get a nice sharp 4K image.
Any advice appreciated, thanks!
Trying to set-up a Lorex LNR608 4K NVR with securityspy.
Everything works great with the low-resolution stream set up with in SecuritySpy by configuring the IP Address, set as Manual Configuration, set as RTSP, and request set as:
cam/realmonitor?channel=1&subtype=1
but I'd like to capture the 4K stream available at subtype 0. If I try that in security spy I get "Unexpected data" in the view window.
If I try the same request in VLC with the request formatted as:
rtsp://[my ip address]/cam/realmonitor?channel=1&subtype=0
it works great and I get a nice sharp 4K image.
Any advice appreciated, thanks!
Comments
Default for the NVR is for the main stream to use h.265 which doesn't work with SecuritySpy. I changed it to h.264H, VBR, Highest (on the NVR setting), then changed my stream subtype=0, and everything looks nice and crisp now.